Face Shield, Sneeze Guard, Reusable, Adjustable Transparent Barrier, Anti-Fog Safety (20 Pack)

Products: Disposable protective clear shields with elastical head bands, no sterile.
Models: 320x 400 mm, 180° full protection and isolation, high light transmittance
Cerification of the presence of the Technical File in regards of the Medical Devices Directive 93/42/EEC Medical Devices Directive Annex VII.
Classification: Class 1 (non sterile). The shields are Category 1 PPE products
Manufacturing of Disposable protective clear shields with elastical head bands, no sterile:
Please note that when manufacturing the face shields we act as if infected by the COVID-19 virus. We wear a face mask and a fresh pair of gloves when collecting each batch of parts.
We store the parts immediately in a sealable bag.
We store the packed face shields and wait for for 2-3 days before distributing them to reduce risk of transmission.
We do not store the entire stock in one place an minimise the risk of cross contamination.
The laser cut face shield is designed as an easy-to-use PET face shield for healthcare staff and essential key workers.
The face shields consist of an adjustable head strap.
The face shields are manufactured by laser cutting techniques and are made from a thermoplastic called polyethylene terephthalate (PET).
Decontamination: Cleaning your face shield
Disinfection (the process of eliminating or reducing harmful microorganisms) and sterilisation (the process of killing all microorganisms )are both acceptable to decontaminating of the face shield.
How to clean the face shield
WARNING: Before you apply any disinfection solution, we advise to try it first near one edge of the visor and inspectt whether the solution cause damage to the surface of the visor.
Face shields can cleaned by regular cleaners, sanitiziers and alcohol wet wipes. Workplaces can use the professional sterilising equipment to decontaminate the face shields.
It is recommended to sink the shield parts into disinfection solutions for best practice, this will ensure the solution reaches 100% of the visor surface. You can also use aerosol (spray) at least twice to reach most of the surface, for best practice.
Most of the solutions evaporate after several minutes. You can remove the remains using a paper towel, throw away surface cleaners. Avoid using the same towel on multiple shields, avoid cross-contamination and always wipe in one direction.
Recommended methods of decontamination

The method of high temperature 120°C and over is tested and evaluated as not ideal for the decontamination process, because of structural damage to the shield as PET material deforms under high temperature

Please dispose the plastic face shiled in non-recycled plastic waste.